From:
Erik Stainsby <stainsby@xxxxxxxxx>
Date:
Tue, 10 Oct 2000 08:08:51 -0700
Subject:
Pneumatic Hammer
Hello Ned,
I've been looking into buying one of these beauties myself.
Atlas-Copco makes them. Called a chipping hammer.
Comes in two styles: cylindrical shank, which will turn in the
gun, and a hex shank which will give the most precise control over
bit-rotation from the handle.
They are not cheap ( @ $1000.00 US ) and require some big air to
drive them. <sigh>
Here are the specs:
http://www.atlascopco.com/tools/products/Bearbetningsverktyg.nsf/7051cd3faf8da08841256657004f1372/3fafc1c7882b0e07c12566810063daef?OpenDocument
That will need to be on one line when pasted into the address line of a web-browser.
Postal and street addresses below, taken from their website.
Good luck.
-- Erik
======
Atlas Copco (Ireland) Ltd.
company information
Visitors Address Kylemore Road
Bluebell
Dublin 12
Postal Address Kylemore Road
Bluebell
Dublin 12
Phone 353-(0)1-450 59 78
Fax 353-(0)1-456 76 86
Email info.ireland@xxxxxxxxxxxxxx
- References
- message 00621: Pneumatic Hammer - Ned (10 Oct 2000)
- Previous by Thread: message 00626: Pneumatic Hammer - Kenneth E Klick (10 Oct 2000)
- Next by Thread: message 00627: Pneumatic Hammer - GeorgeJulieJessie Graham (11 Oct 2000)
- Previous by Date: message 00626: Pneumatic Hammer - Kenneth E Klick (10 Oct 2000)
- Next by Date: message 00627: Pneumatic Hammer - GeorgeJulieJessie Graham (11 Oct 2000)
