From:
"George Graham" <georgergraham@xxxxxxxxxxx>
Date:
Sun, 24 Nov 2002 09:31:18 -0500
Subject:
drilling into soapstone
Jay,
Try using a wood rasp burr/bit that goes into a drill. I've used one that is
a cylinder that is flat on the bottom,and has teeth or file edges on the
bottom. As long as you are working in soft stone, these burrs will work
fine. If you get into harder stone, then you would have to get into higher
quality burrs, carbide and diamond tools.
Good luck,
George Graham
- References
- message 00207: drilling into soapstone - JB (23 Nov 2002)
- Previous by Thread: message 00209: drilling into soapstone - Stonecarver001 (24 Nov 2002)
- Next by Thread: message 00211: drilling into soapstone - John VanCamp (24 Nov 2002)
- Previous by Date: message 00209: drilling into soapstone - Stonecarver001 (24 Nov 2002)
- Next by Date: message 00211: drilling into soapstone - John VanCamp (24 Nov 2002)
