From:
Norman Watts <Norman_Watts@zzzzzzz>
Date:
Thu, 5 Feb 2004 13:56:14 -0500
Subject:
Cuturi air hammer oil
I have been slowly reading my way through the archives (one by one!) and I
have seen lots and lots of discussion on the dangers of dust. But how about
oil aerosols? I've never laid hand on an air hammer but you all seem to be
oiling a lot, and by the nature of the work you are close to the exhaust.
Our oil pups in the lab have traps on the exhaust side, or they have a line
to a vent. After a while this line can accumulate a surprising amount of
oil. And pumps are even designed to not loose oil. Just wondering.
- References
- message 00020: Cuturi air hammer oil - George Graham (05 Feb 2004)
- Previous by Thread: message 00020: Cuturi air hammer oil - George Graham (05 Feb 2004)
- Next by Thread: message 00033: Cuturi air hammer - Simon Brown (06 Feb 2004)
- Previous by Date: message 00021: Cuturi air hammer... stopped working! Please Help! - Ken Barnes (05 Feb 2004)
- Next by Date: message 00023: Air Hammers - DFlan77 (05 Feb 2004)
