From:
John Richardson <richards@zzzzzzzzzz>
Date:
Mon, 16 Feb 2004 10:05:25 -0500
Subject:
Bali Frieze
More good tips, thanks. I am not familiar with a 'PVA' glue - is that a
particular type of water soluable (presumably since you are recommending
diluting with water) glue. Where would these normally be available?
Agreed the pic wouldn't show the grain or color variation. The grain is
fine and relatively consistent in color across the frieze, but there is
probably variation in the grains themselves.
Testing on the back also good idea, since most of the cracks go through.
The freize is deep enough so should be able to get sufficient raw material.
John Richardson
- Follow-ups
- message 00153: Bali Frieze - Tom Blatt (16 Feb 2004)
- Previous by Thread: message 00150: Bali Frieze - Simon Brown (16 Feb 2004)
- Next by Thread: message 00153: Bali Frieze - Tom Blatt (16 Feb 2004)
- Previous by Date: message 00150: Bali Frieze - Simon Brown (16 Feb 2004)
- Next by Date: message 00152: bankers - Norman Watts (16 Feb 2004)
