From:
abknight@zzzzzz
Date:
Fri, 12 Mar 2004 20:17:38 -0600 (CST)
Subject:
vibration - gloves
Hi,
I was at one point very interested in how things looked when they are
squeezed; how the buldge etc., and I bought a sheet of gel-pad material.
It's neat stuff: unbreakable. Anyway it does make for good antivibe
reduction. Like with a rock drill I just use a 4"x4" piece (its about 1/2"
thick) and set it between my palm and the handle. Takes all the kick out of
the hammer. With a 1" hammer I sometimes use a little doughnut on the butt
of the tool around the air line nipple.
- References
- message 00403: wandering off down an alleyway - gloves - scott goniea (12 Mar 2004)
- Previous by Thread: message 00404: vibration - gloves - Clive Murray-White (12 Mar 2004)
- Next by Thread: message 00406: wandering off down an alleyway - gloves - Charles Kibby (13 Mar 2004)
- Previous by Date: message 00407: Corporate sponsorship - abknight (13 Mar 2004)
- Next by Date: message 00409: Marble resistance to Weather - abknight (13 Mar 2004)
