From:
"william m woodard" <stoneturning@zzzzzzz>
Date:
Wed, 02 Feb 2005 08:51:08 -0700
Subject:
Material removal
Quoted text begins.Ok it's me again and thanks for all your help. I have one other
question about removing the material. Would a forstner bit work?
Thanks,
Lisa A.
End of quote.
ps If one starts the hole with drill bit in place and then drill down
enough to get a bite on all cuts it will allow for the drill bit to be taken
out and finish drilling to depth without a small drill hole at centre
deeper than required.
- References
- message 00325: Material removal - Lisa Euchard (02 Feb 2005)
- Previous by Thread: message 00326: Material removal - william m woodard (02 Feb 2005)
- Next by Thread: message 00344: Material removal - abknight (04 Feb 2005)
- Previous by Date: message 00326: Material removal - william m woodard (02 Feb 2005)
- Next by Date: message 00328: It's not necessarily stone but it's really cool - abknight (02 Feb 2005)
