From:
"John Klassen" <jaklassen2001@zzzzzzzzzzzz>
Date:
Mon, 7 Mar 2005 19:40:59 -0600
Subject:
Homemade Chisels
Quoted text begins.Could you tell me what kind of grinding wheel you used
to finish the tip???
End of quote.
Hi Bob,
I used a silicon carbide(green) grinding wheel 220grit on the carbide tip.
I invite any of the old hands to comment, but, that's what I have so that's
what I use. Just keep it cool with a dipping can of water.
I'm sure there is lot's of advice out there for sharpening carbide tipped
chisels. These are also the first one's that I have so I'm all ears.
Hopefully someone else will have some more info.
Here's to keeping your chisels sharp
John
- Follow-ups
- message 00613: Homemade Chisels - Simon Brown (08 Mar 2005)
- message 00610: Homemade Chisels - John VanCamp (08 Mar 2005)
- References
- message 00601: Homemade Chisels - Rstrainsr (07 Mar 2005)
- Previous by Thread: message 00601: Homemade Chisels - Rstrainsr (07 Mar 2005)
- Next by Thread: message 00610: Homemade Chisels - John VanCamp (08 Mar 2005)
- Previous by Date: message 00605: Fixing broken alabaster - Charles Kibby (08 Mar 2005)
- Next by Date: message 00607: Homemade Chisels - Bill Marsh (08 Mar 2005)
