From:
Robin Antar <info@zzzzzzzzzz>
Date:
Mon, 06 Feb 2006 23:07:28 -0500
Subject:
stone dust masks
I hope you use a good mask; I use the air mate by 3M. It has a waist air
flitter to bring in fresh air. Then I got a hard face shield from an auto
body mask (spray paint) and I connect it to the air mate. The face shield
that comes with the air mate is not hard and only keeps dust out, not
protecting you from flying burs or hard chips. This way I have the best of
both masks, also I could put a pair of glasses in side. It is a very
expensive set up, but worth it. After 30 years of carving and just wearing
a mask in the past 15 yrs. It is not a luxurity.
Robin Antar
President
Realism in Stone a division of
Antar Studios Inc.
info@----------
http://www.rantar.com
Phone (718) 375-5156
- References
- message 00302: stone dust - John Vancamp (06 Feb 2006)
- Previous by Thread: message 00306: stone dust - Clive Murray-White (06 Feb 2006)
- Next by Thread: message 00308: Stone dust - Eric Penkauskas (06 Feb 2006)
- Previous by Date: message 00311: stone dust - Robin Antar (07 Feb 2006)
- Next by Date: message 00313: Redust extraction system! - Robin Antar (07 Feb 2006)
